Fieldsight® GW
Mapping and tracking device
Applies:
- Cable trenching
- Maintenance trains
Fieldsight® GW allows for cable laying and simultaneous creation of as-built documentation. It also supports machine positioning, making it ideal for tracking and managing maintenance trains and other equipment.
Starting from 650€/month
The device is installed in the cockpit, with the antenna mounted on the excavator bucket. This setup allows you to create as-built documentation instantly and transmit it to all stakeholders in real time, significantly saving both time and costs
Centimeter positioning for machines
You can easily track machine locations in real time by installing the GW.
OPERATE FULLY FROM THE COCKPIT
GW comes with the Fieldsight® Survey app and GIS software
Get your questions answered
Product information of GW
Features
Processor: Arm Cortex M4F CPU, Arm Cortex A7, Cryptographic co-processor with secure key store
Memory: 256KB RAM, 1MB Flash, 4MB EEPROM. Support for 4GB of external flash
Contact:
- 2G-4G – LTE, UMTS/HSPA+;
- GSM, GPRS, EDGE;
- Wi-Fi 802.11b/g/n, Ethernet 100 mb/s;
- Bluetooth 5 Long-range, LE,
- CLASSIC, MESH GNSS (GPS, GLONASS, BeiDou, Galileo, QZSS);
- Support for 184-channel RTK GNSS;
- Support for microSIM and eSIM
Sensors:
- 9-axis motion detection unit (1kHz);
- 3-axis accelerometer;
- (1.6kHZ, 1µA low power, 10000g);
- Temperature, humidity and air pressure;
- Microphone
I/O:
- 1 x USB 2.0 for data and charging;
- 4 x input relay, activated relay to ground;
- 1 x output relay (galvanic isolation);
- 1 x analogue i/o 4-20mA;
- 1 x digital output;
- 1 x RS-485;
- 2 x M12 connectors (power and ethernet);
- 3 x SMA, external antenna connectors
Mechanical
Product dimensions: 111x102x45 mm
Printed from: 400 g
Operating temperature: from -40 to +80°C
Battery life and uptime: 1
- 2-48V DC, min. 12 V / 1A input via M12 interface,
- 5V USB / 10W / 2A via M12 interface,
- Support for Lithium-ion 3000 mAh battery
IP protection class: IP 67